Sharp Lathe, 220 Volts, 15 HP, 60 Hz, 3 Phase
Original price was: $516.00.$97.99Current price is: $97.99.
Lathe, Distance Between Centers 160 in, Voltage 220V AC, Horsepower 15 hp, Min. Spindle Speed 10 RPM, Application Metal Turning, Overall Height 52 in, Overall Length 226 in, Overall Width 40 1/2 in, Max. Spindle Speed 1,000 RPM, Tailstock Taper MT18, Spindle Nose Type D1-11 Camlock
Sharp #26160B Specifications
- Zoro #: G7686511
- Mfr #: 26160B
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 15
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 26
- Horsepower: 15 hp
- Spindle Bore (In.): 4-47/64
- Gap Length (In.): 8
- Overall Length: 226 in
- Swing Over Cross Slide (In.): 17-1/4
- Overall Width: 40 1/2 in
- Compound Travel (In.): 7-3/4
- Features: Camlock Spindle, Direct Selection for Inch/Metric Threads, One Piece Cast Meehanite Bed, Quick Change Gearbox
- Longitudinal Feed Rates: 0.002 to 0.032
- Number of Threads (In.): 44
- Thread Range (In.): 2 to 56
- Includes: (4) Jaw 16 in Chucks, 20 in Faceplate, 4-Way Carriage Stop, 4-Way Tool Post, Coolant System, Follow Rest, Halogen Light, Rapid Transverse on Longitudinal, Steady Rest, Tailstock, Tool Kit
- Thread Range (mm): 2 to 56
- Distance Between Centers (In.): 160
- Cross Travel (In.): 14-3/4
- Swing In Gap (In.): 35
- Cross Feed Rates: 0.001 to 0.094
- Carriage Travel (In.): 160
- Spindle Taper: MT-5
- Hz: 60
- Tailstock Travel (In.): 6-1/2
- Number of Threads (mm): 40
- Number of Spindle Speeds: 12
- Overall Height: 52 in
- Spindle Speed (RPM): 10 to 1000
- Tailstock Taper: MT18
- Bed Width (In.): 15-3/4
- Coolant Tank Capacity: 10 gal.
- Min. Metric Thread: 0.5 mm (Module), 4 mm (D.P)
- Max. Cross Feed: 0.0094 in
- Swing Over Cross Slide: 17 1/4 in
- Distance Between Centers: 160 in
- Max. Threads per Inch: 56
- Min. Cross Feed: 0.0010 in
- Bed Width: 15 3/4 in
- Min. Spindle Speed: 10 RPM
- Gap Length: 16 in
- Application: Metal Turning
- Number of Inch Threads: 44
- Max. Spindle Speed: 1,000 RPM
- Swing In Gap: 35 in
- Swing Over Bed: 26 in
- Number of Metric Threads: 40
- Spindle Nose Type: D1-11 Camlock
- Spindle Bore: 4 47/64 in
- Min. Threads per Inch: 2
- Max. Metric Thread: 14 mm (Module), 56 mm (D.P)
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Makita Cb-303 Carbon Brush Set Cb-303, Fits Brand Makita
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Engraving Pen, Industrial, 13,500 Blows per Minute, 1.1 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 3/16 in Min. Hose Size, Overall Length 5 in, Hose Length 96 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
This Milwaukee Quik-Lok® cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Diamond Point, Replacement Point for 2Z204
Makita Carbon Brush Set Cb-440, Fits Brand Makita
This pack of 10 Bi-Metal Oscillating Tool Blades from Fein is a great way to keep your oscillating tool blades well-stocked. The 1 3/4" size fits most oscillating tools on the market today. Made of bi-metal, these blades are tough and durable. They have a straight cut style that makes them suitable for use with wood, metal, plastic and plasterboards. The Fein 10 Pack Bi Metal Oscillating Tool Blades are made to work hard while being kind to the environment at the same time.
Cutting Blade Set, Blade Type Fast Cut, Long Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Round, Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Diameter 3 1/2 in, Blade Width 1 3/8 in, 2 1/2 in, 3 1/2 in, Blade Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Overall Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000
Contact Arm Assembly, Type 3/4 in x 5/8 in, For Use With 40320, 40321
Tube and Pipe Notcher, Maximum Notch Diameter 2 3/8 in, Maximum Pipe Wall Thickness 0.134 in, Maximum Compatible Pipe Size 2 in, Minimum Compatible Pipe Size 1 1/2 in, Includes Stand No, Mounting Bench Mount, Wall Mount
Tube and Pipe Bender Stand,37x13x14 In., Color Blue, Compatible with Manufacturer Part Number WFB2, Compatible with Product Type Manual Tube and Pipe Bender
Cutting Blade Set, Blade Type Fast Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Width 1 3/8 in, 2 1/2 in, Blade Length 3 11/16 in, 4 1/16 in, Overall Length 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000, Primary Material Application Soft Metals, Drywall, Plastic, Wood, Nail-Embedded Wood, Materials Cut Copper Pipe, Drywall, PVC, Wood, Wood with Nails, Cut Style Flush Cut
Reviews
There are no reviews yet.