Sharp Lathe, 220 Volts, 15 HP, 60 Hz, 3 Phase
Original price was: $542.00.$94.99Current price is: $94.99.
Lathe, Distance Between Centers 80 in, Voltage 220, Horsepower 15, Min. Spindle Speed 10 RPM, Application Metal Turning, Overall Height 50 in, Overall Length 137 in, Overall Width 40 1/2 in, Max. Spindle Speed 1,000 RPM, Tailstock Taper MT10, Spindle Nose Type D1-11 Camlock
Sharp #2280B Specifications
- Zoro #: G5061870
- Mfr #: 2280B
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 15
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 22
- Horsepower: 15 hp
- Swing In Gap (In.): 31
- Includes: (4) Jaw 16 in Chucks, 20 in Faceplate, 4-Way Carriage Stop, 4-Way Tool Post, Coolant System, Follow Rest, Halogen Light, Rapid Transverse on Longitudinal, Steady Rest, Tailstock, Tool Kit
- Gap Length (In.): 14-1/2
- Number of Spindle Speeds: 12
- Spindle Taper: MT-5
- Carriage Travel (In.): 80
- Cross Travel (In.): 14-3/4
- Thread Range (In.): 2 to 56
- Hz: 60
- Thread Range (mm): 2 to 56
- Overall Length: 137 in
- Spindle Speed (RPM): 10 to 1000
- Overall Height: 50 in
- Tailstock Travel (In.): 6-1/2
- Compound Travel (In.): 7-3/4
- Cross Feed Rates: 0.001 to 0.094
- Spindle Bore (In.): 4-47/64
- Overall Width: 40 1/2 in
- Tailstock Taper: MT10
- Number of Threads (In.): 44
- Features: Camlock Spindle, Direct Selection for Inch/Metric Threads, One Piece Cast Meehanite Bed, Quick Change Gearbox
- Coolant Tank Capacity: 10 gal.
- Bed Width (In.): 15-3/4
- Swing Over Cross Slide (In.): 13-3/16
- Number of Threads (mm): 40
- Distance Between Centers (In.): 80
- Longitudinal Feed Rates: 0.002 to 0.032
- Min. Spindle Speed: 10 RPM
- Min. Threads per Inch: 2
- Number of Metric Threads: 40
- Max. Metric Thread: 14 mm (Module), 56 mm (D.P)
- Application: Metal Turning
- Max. Spindle Speed: 1,000 RPM
- Spindle Bore: 4 47/64 in
- Gap Length: 14 1/2 in
- Number of Inch Threads: 44
- Max. Cross Feed: 0.0094 in
- Bed Width: 15 3/4 in
- Swing Over Bed: 22 in
- Min. Cross Feed: 0.0010 in
- Distance Between Centers: 80 in
- Spindle Nose Type: D1-11 Camlock
- Min. Metric Thread: 0.5 mm (Module), 4 mm (D.P)
- Max. Threads per Inch: 56
- Swing In Gap: 31 in
- Swing Over Cross Slide: 13 3/16 in
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Hook and Loop Pad, 7 in.
Cutting Blade Set, Blade Type Fast Cut, Long Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Round, Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Diameter 3 1/2 in, Blade Width 1 3/8 in, 2 1/2 in, 3 1/2 in, Blade Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Overall Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000
Diamond Point, Replacement Point for 2Z204
Makita Cb-303 Carbon Brush Set Cb-303, Fits Brand Makita
Oscillating Blades, Material Bi-Metal, Size 1-3/16 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Plunge, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
This pack of 10 Bi-Metal Oscillating Tool Blades from Fein is a great way to keep your oscillating tool blades well-stocked. The 1 3/4" size fits most oscillating tools on the market today. Made of bi-metal, these blades are tough and durable. They have a straight cut style that makes them suitable for use with wood, metal, plastic and plasterboards. The Fein 10 Pack Bi Metal Oscillating Tool Blades are made to work hard while being kind to the environment at the same time.
Electric Engraver, Strokes per Minute 2200, 0.5 Amps @ 120V, 2 Speed Switch, For Use With Diamond Wheel Point, Engraving Metal, Leather, Plastic, Woods, Dial 5-Position Calibrated Stroke Adjustment, Regulates Engraving Depth, Yes Soft Grip, Tool Length 5.014 in, Tool Weight 0.45 lb, UL Listed
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Cutting Blade Set, Blade Type Fast Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Width 1 3/8 in, 2 1/2 in, Blade Length 3 11/16 in, 4 1/16 in, Overall Length 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000, Primary Material Application Soft Metals, Drywall, Plastic, Wood, Nail-Embedded Wood, Materials Cut Copper Pipe, Drywall, PVC, Wood, Wood with Nails, Cut Style Flush Cut
Engraving Pen, Industrial, 13,500 Blows per Minute, 1.1 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 3/16 in Min. Hose Size, Overall Length 5 in, Hose Length 96 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Reviews
There are no reviews yet.