Sharp Lathe, 220 Volts, 15 HP, 60 Hz, 3 Phase
Original price was: $423.00.$95.99Current price is: $95.99.
Lathe, Distance Between Centers 80 in, Voltage 220V AC, Horsepower 15 hp, Min. Spindle Speed 10 RPM, Application Metal Turning, Overall Height 52 in, Overall Length 137 in, Overall Width 40 1/2 in, Max. Spindle Speed 1,000 RPM, Tailstock Taper MT15, Spindle Nose Type D1-11 Camlock
Sharp #2680B Specifications
- Zoro #: G7686502
- Mfr #: 2680B
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 15
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 26
- Horsepower: 15 hp
- Thread Range (In.): 2 to 56
- Spindle Speed (RPM): 10 to 1000
- Overall Width: 40 1/2 in
- Number of Threads (In.): 44
- Overall Length: 137 in
- Gap Length (In.): 8
- Tailstock Taper: MT15
- Distance Between Centers (In.): 80
- Coolant Tank Capacity: 10 gal.
- Spindle Taper: MT-5
- Bed Width (In.): 15-3/4
- Swing In Gap (In.): 35
- Number of Threads (mm): 40
- Tailstock Travel (In.): 6-1/2
- Carriage Travel (In.): 80
- Hz: 60
- Swing Over Cross Slide (In.): 17-1/4
- Cross Feed Rates: 0.001 to 0.094
- Includes: (4) Jaw 16 in Chucks, 20 in Faceplate, 4-Way Carriage Stop, 4-Way Tool Post, Coolant System, Follow Rest, Halogen Light, Rapid Transverse on Longitudinal, Steady Rest, Tailstock, Tool Kit
- Features: Camlock Spindle, Direct Selection for Inch/Metric Threads, One Piece Cast Meehanite Bed, Quick Change Gearbox
- Thread Range (mm): 2 to 56
- Longitudinal Feed Rates: 0.002 to 0.032
- Cross Travel (In.): 14-3/4
- Number of Spindle Speeds: 12
- Spindle Bore (In.): 4-47/64
- Overall Height: 52 in
- Compound Travel (In.): 7-3/4
- Min. Metric Thread: 0.5 mm (Module), 4 mm (D.P)
- Max. Threads per Inch: 56
- Swing Over Cross Slide: 17 1/4 in
- Application: Metal Turning
- Number of Inch Threads: 44
- Min. Spindle Speed: 10 RPM
- Distance Between Centers: 80 in
- Spindle Nose Type: D1-11 Camlock
- Swing In Gap: 35 in
- Min. Cross Feed: 0.0010 in
- Gap Length: 16 in
- Bed Width: 15 3/4 in
- Spindle Bore: 4 47/64 in
- Swing Over Bed: 26 in
- Min. Threads per Inch: 2
- Max. Spindle Speed: 1,000 RPM
- Number of Metric Threads: 40
- Max. Cross Feed: 0.0094 in
- Max. Metric Thread: 14 mm (Module), 56 mm (D.P)
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Random Orbital Polisher, Size 6, No Load RPM 2500 to 6800, Amps 4.5 A, Spindle Thread Size 5/16 In.-24, Cord 7 ft 2-Conductor, Features 120 V, Random, Swirl Free Polishing Action, Bearings Ball and Roller, Tool Length 11 1/2 in, Tool Weight 5.8 lb, Handle Design Barrel Grip, Speed Type Variable, Switch Type Slide, Includes Polishing Pad, Side Handle, Wrench. Ideal for polishing and sanding automotive and marine projects, this 6 in. Variable-Speed Random Orbit Polisher features a 4.5-amp motor for high overload protection and random orbit. Compact and lightweight at just 5-1/2 lbs., it delivers professional, swirl-free sanding/polishing action with an electronic variable-speed dial to select 2,500-6,800 OPM. Accepts 5/16 to 24 spindle thread accessories. Full ball-and-roller Bearing construction provides durability under industrial workloads. It features a proprietary counter balance for use with a 6-in. sanding/polishing pad and two-position (left or right) removable side handle for greater comfort and control.
Bench Buffer, For Max. Wheel Dia. 6 in, Speed Setting Single Speed, Arbor Size 1/2 in, Dust Management No Dust Management, Lights Included No, Application Buffing Finish on Metal, Metal Fabrication Cleanup, Plastics, Stones, Wood, Bearing Type Ball Bearing
Shear Blade, For Use With Grainger Item Number 30N971, 4PKV3, 5GUV7, 7DX78, For Use With Mfr. Model Number 2470-059, 2470-20, 2470-21, 48-11-2440, Fits Brand Milwaukee
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Engraving Pen, Industrial, 13,500 Blows per Minute, 1.1 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 3/16 in Min. Hose Size, Overall Length 5 in, Hose Length 96 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Oscillating Blade, Material High Carbon Steel, Size 1-1/4 in, Overall Length 4 in, Application Cardboard, Cutting Carpet, Shingles, For Use With All Oscillating Tools
Hook and Loop Pad, 7 in.
Portable Mini Brake, Bending Length (In.) 48 in, Cutting Width (In.) -, Capacity of Mild Steel (Gauge) 22, Finger Width (In.) -, Max. Box Depth (In.) Infinite, Max. Lift of Beam (In.) 3/8 in, – Blade, Structural Steel, Die -, Cam-over Style Clamps, Compact Size, Dual-Direction, Extra Wide Feet, No Fixed Throat Depth
Planer, Voltage 230, 2 Speed, Motor HP 5 hp, 23 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20,000, Feed Rates (FPM) 24/31, No Load RPM 5,000 RPM, Helical Cutter Head, Motor Phase 1, Two Speed Gearbox, Cast Iron, Overall Depth (In.) 44 in, Overall Height (In.) 23 in, Overall Width (In.) 28 in
Oscillating Plunge Saw Blades, Material Bi-Metal, Size 1-3/8 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Reviews
There are no reviews yet.