Sharp Lathe, 220 Volts, 30 HP, 60 Hz, 3 Phase
Original price was: $482.00.$96.99Current price is: $96.99.
Lathe, Distance Between Centers 315 in, Voltage 220, Horsepower 30, Min. Spindle Speed 4 RPM, Application Metal Turning, Overall Height 80 45/64 in, Overall Length 422-13/16 in, Overall Width 85 13/32 in, Max. Spindle Speed 420 RPM, Tailstock Taper MT32
Sharp #80315-32M Specifications
- Zoro #: G7686758
- Mfr #: 80315-32M
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 30
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 80-1/4
- Horsepower: 30 hp
- Spindle Speed (RPM): 4 to 420
- Number of Threads (mm): 60
- Tailstock Taper: MT32
- Overall Width: 85 13/32 in
- Hz: 60
- Thread Range (In.): 1/4 to 30
- Number of Threads (In.): 61
- Compound Travel (In.): 15-3/4
- Bed Width (In.): 7-1/4
- Distance Between Centers (In.): 315
- Number of Spindle Speeds: 16
- Cross Feed Rates: 0.0012 to 0.14
- Swing In Gap (In.): 91-1/4
- Carriage Travel (In.): 80
- Longitudinal Feed Rates: 0.0024 to 0.28
- Coolant Tank Capacity: 10 gal.
- Tailstock Travel (In.): 3-15/16
- Cross Travel (In.): 27-9/16
- Overall Length: 422 13/16 in
- Spindle Taper: MT-6
- Spindle Bore (In.): 1
- Gap Length (In.): 80
- Swing Over Cross Slide (In.): 64-3/16
- Thread Range (mm): 2 to 56
- Overall Height: 80 45/64 in
- Includes: (3) Jaw Chucks, Coolant System, Dead Centers and Sleeves, Electric Power Tailstock on Larger Sizes, Longitudinal Stops, Rear Spindle Chuck, Steady Rest, Toolbox with Tools
- Features: Alloy Steel Gears In Headstock, Electro-Magnetic Spindle Brake, Extra Bedways Support At Front of Machine, Massive One Piece Casting Machine Base, Turcite Coating On Longitudinal and Cross Slide Areas, Two Stage Spindle Start Up, Universal Gearbox
- Min. Cross Feed: 0.0012 in
- Application: Metal Turning
- Distance Between Centers: 315 in
- Swing Over Bed: 80 1/4 in
- Swing Over Cross Slide: 64 3/16 in
- Number of Inch Threads: 61
- Max. Threads per Inch: 30
- Swing In Gap: 91 1/4 in
- Max. Cross Feed: 0.1400 in
- Number of Metric Threads: 60
- Max. Metric Thread: 56 mm
- Max. Spindle Speed: 420 RPM
- Min. Spindle Speed: 4 RPM
- Min. Threads per Inch: 1/4
- Gap Length: 80 in
- Spindle Bore: 6 in
- Bed Width: 32 in
- Min. Metric Thread: 2 mm
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Diamond Point, Replacement Point for 2Z204
Cutting Blade Set, Blade Type Fast Cut, Long Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Round, Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Diameter 3 1/2 in, Blade Width 1 3/8 in, 2 1/2 in, 3 1/2 in, Blade Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Overall Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000
Contact Arm Assembly, Type 3/4 in x 5/8 in, For Use With 40320, 40321
Shear Blade, For Use With Grainger Item Number 30N971, 4PKV3, 5GUV7, 7DX78, For Use With Mfr. Model Number 2470-059, 2470-20, 2470-21, 48-11-2440, Fits Brand Milwaukee
Makita Carbon Brush Set Cb-440, Fits Brand Makita
Oscillating Plunge Saw Blades, Material Bi-Metal, Size 1-3/8 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Electric Right Angle Polisher, Size 7, No Load RPM 600 to 3000, Amps 10.0 A, Spindle Thread Size 5/8 in, Cord 8 ft, Features Lock On Button, Side Handle, Speed Control,Soft Start, Variable Speed, Bearings Ball and Needle, Tool Length 18 1/2 in, Tool Weight 6.6 lb, Handle Design Rat Tail, Speed Type Variable, Switch Type Trigger, Includes Hook and Loop Pad and Wrench
Engraving Pen, Industrial, 13,500 Blows per Minute, 1.1 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 3/16 in Min. Hose Size, Overall Length 5 in, Hose Length 96 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Random Orbital Polisher, Size 6, No Load RPM 2500 to 6800, Amps 4.5 A, Spindle Thread Size 5/16 In.-24, Cord 7 ft 2-Conductor, Features 120 V, Random, Swirl Free Polishing Action, Bearings Ball and Roller, Tool Length 11 1/2 in, Tool Weight 5.8 lb, Handle Design Barrel Grip, Speed Type Variable, Switch Type Slide, Includes Polishing Pad, Side Handle, Wrench. Ideal for polishing and sanding automotive and marine projects, this 6 in. Variable-Speed Random Orbit Polisher features a 4.5-amp motor for high overload protection and random orbit. Compact and lightweight at just 5-1/2 lbs., it delivers professional, swirl-free sanding/polishing action with an electronic variable-speed dial to select 2,500-6,800 OPM. Accepts 5/16 to 24 spindle thread accessories. Full ball-and-roller Bearing construction provides durability under industrial workloads. It features a proprietary counter balance for use with a 6-in. sanding/polishing pad and two-position (left or right) removable side handle for greater comfort and control.
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Mini Joiner Biscuits,R2,Package Quantity 50
Reviews
There are no reviews yet.