Sharp Lathe, 220 Volts, 30 HP, 60 Hz, 3 Phase
Original price was: $408.00.$94.99Current price is: $94.99.
Lathe, Distance Between Centers 315 in, Voltage 220V AC, Horsepower 30 hp, Min. Spindle Speed 4 RPM, Application Metal Turning, Overall Height 76 in, Overall Length 420 in, Overall Width 85 13/32 in, Max. Spindle Speed 420 RPM, Tailstock Taper MT30
Sharp #70315-32M Specifications
- Zoro #: G7686791
- Mfr #: 70315-32M
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 30
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 70-7/8
- Horsepower: 30 hp
- Number of Threads (mm): 60
- Spindle Taper: MT-6
- Number of Threads (In.): 61
- Overall Length: 420 in
- Tailstock Taper: MT30
- Cross Feed Rates: 0.0012 to 0.14
- Hz: 60
- Carriage Travel (In.): 70
- Thread Range (mm): 2 to 56
- Number of Spindle Speeds: 16
- Coolant Tank Capacity: 10 gal.
- Cross Travel (In.): 27-9/16
- Spindle Bore (In.): 1
- Thread Range (In.): 1/4 to 30
- Swing In Gap (In.): 81-7/8
- Tailstock Travel (In.): 3-15/16
- Spindle Speed (RPM): 4 to 420
- Compound Travel (In.): 15-3/4
- Swing Over Cross Slide (In.): 54-11/16
- Overall Height: 76 in
- Distance Between Centers (In.): 315
- Overall Width: 85 13/32 in
- Bed Width (In.): 7-1/4
- Gap Length (In.): 70
- Longitudinal Feed Rates: 0.0024 to 0.28
- Features: Alloy Steel Gears In Headstock, Electro-Magnetic Spindle Brake, Extra Bedways Support At Front of Machine, Massive One Piece Casting Machine Base, Turcite Coating On Longitudinal and Cross Slide Areas, Two Stage Spindle Start Up, Universal Gearbox
- Includes: (3) Jaw Chucks, Coolant System, Dead Centers and Sleeves, Electric Power Tailstock on Larger Sizes, Longitudinal Stops, Rear Spindle Chuck, Steady Rest, Toolbox with Tools
- Gap Length: 70 in
- Min. Metric Thread: 2 mm
- Swing In Gap: 81 7/8 in
- Number of Inch Threads: 61
- Min. Threads per Inch: 1/4
- Swing Over Cross Slide: 54 11/16 in
- Application: Metal Turning
- Spindle Bore: 6 in
- Max. Cross Feed: 0.1400 in
- Min. Spindle Speed: 4 RPM
- Max. Spindle Speed: 420 RPM
- Distance Between Centers: 315 in
- Min. Cross Feed: 0.0012 in
- Swing Over Bed: 70 7/8 in
- Number of Metric Threads: 60
- Bed Width: 32 in
- Max. Metric Thread: 56 mm
- Max. Threads per Inch: 30
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Oscillating Blade, Material High Carbon Steel, Size 1-1/4 in, Overall Length 4 in, Application Cardboard, Cutting Carpet, Shingles, For Use With All Oscillating Tools
Electric Engraver, Strokes per Minute 2200, 0.5 Amps @ 120V, 2 Speed Switch, For Use With Diamond Wheel Point, Engraving Metal, Leather, Plastic, Woods, Dial 5-Position Calibrated Stroke Adjustment, Regulates Engraving Depth, Yes Soft Grip, Tool Length 5.014 in, Tool Weight 0.45 lb, UL Listed
Cutting Blade Set, Blade Type Fast Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Width 1 3/8 in, 2 1/2 in, Blade Length 3 11/16 in, 4 1/16 in, Overall Length 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000, Primary Material Application Soft Metals, Drywall, Plastic, Wood, Nail-Embedded Wood, Materials Cut Copper Pipe, Drywall, PVC, Wood, Wood with Nails, Cut Style Flush Cut
Random Orbital Polisher, Size 6, No Load RPM 2500 to 6800, Amps 4.5 A, Spindle Thread Size 5/16 In.-24, Cord 7 ft 2-Conductor, Features 120 V, Random, Swirl Free Polishing Action, Bearings Ball and Roller, Tool Length 11 1/2 in, Tool Weight 5.8 lb, Handle Design Barrel Grip, Speed Type Variable, Switch Type Slide, Includes Polishing Pad, Side Handle, Wrench. Ideal for polishing and sanding automotive and marine projects, this 6 in. Variable-Speed Random Orbit Polisher features a 4.5-amp motor for high overload protection and random orbit. Compact and lightweight at just 5-1/2 lbs., it delivers professional, swirl-free sanding/polishing action with an electronic variable-speed dial to select 2,500-6,800 OPM. Accepts 5/16 to 24 spindle thread accessories. Full ball-and-roller Bearing construction provides durability under industrial workloads. It features a proprietary counter balance for use with a 6-in. sanding/polishing pad and two-position (left or right) removable side handle for greater comfort and control.
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Engraving Pen, General, 32,400 Blows per Minute, 1.7 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 1/4 in Min. Hose Size, Overall Length 5 4/5 in, Hose Length 79 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Oscillating Plunge Saw Blades, Material Bi-Metal, Size 1-3/8 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Oscillating Saw Blades, Material Bi-Metal, Size 1-1/8 in, Overall Length 4 5/16 in, Application Aluminum, Cooper, Drywall, Metal, Nails, Plastic, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Oscillating Blades, Material Bi-Metal, Size 1-3/16 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Plunge, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Reviews
There are no reviews yet.