Sharp Lathe, 220 Volts, 30 HP, 60 Hz, 3 Phase
Original price was: $565.00.$96.99Current price is: $96.99.
Lathe, Distance Between Centers 240 in, Voltage 220, Horsepower 30, Min. Spindle Speed 4 RPM, Application Metal Turning, Overall Height 60 39/64 in, Overall Length 344 in, Overall Width 85 13/32 in, Max. Spindle Speed 420 RPM, Tailstock Taper MT24
Sharp #40240-32M Specifications
- Zoro #: G7686660
- Mfr #: 40240-32M
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 30
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 40
- Horsepower: 30 hp
- Tailstock Taper: MT24
- Cross Feed Rates: 0.0012 to 0.14
- Cross Travel (In.): 27-9/16
- Hz: 60
- Includes: (3) Jaw Chucks, Coolant System, Dead Centers and Sleeves, Electric Power Tailstock on Larger Sizes, Longitudinal Stops, Rear Spindle Chuck, Steady Rest, Toolbox with Tools
- Overall Height: 60 39/64 in
- Gap Length (In.): 23-7/16
- Features: Alloy Steel Gears In Headstock, Electro-Magnetic Spindle Brake, Extra Bedways Support At Front of Machine, Massive One Piece Casting Machine Base, Turcite Coating On Longitudinal and Cross Slide Areas, Two Stage Spindle Start Up, Universal Gearbox
- Spindle Taper: MT-6
- Coolant Tank Capacity: 10 gal.
- Spindle Speed (RPM): 4 to 420
- Number of Spindle Speeds: 16
- Thread Range (In.): 1/4 to 30
- Swing In Gap (In.): 51
- Overall Length: 344 in
- Swing Over Cross Slide (In.): 6-1/2
- Bed Width (In.): 7-1/4
- Overall Width: 85 13/32 in
- Tailstock Travel (In.): 3-15/16
- Number of Threads (mm): 60
- Thread Range (mm): 2 to 56
- Distance Between Centers (In.): 240
- Spindle Bore (In.): 1
- Longitudinal Feed Rates: 0.0024 to 0.28
- Compound Travel (In.): 15-3/4
- Carriage Travel (In.): 240
- Number of Threads (In.): 61
- Max. Threads per Inch: 30
- Swing In Gap: 51 in
- Gap Length: 23 7/16 in
- Swing Over Bed: 40 in
- Spindle Bore: 6 in
- Min. Cross Feed: 0.0012 in
- Min. Threads per Inch: 1/4
- Max. Cross Feed: 0.1400 in
- Max. Spindle Speed: 420 RPM
- Max. Metric Thread: 56 mm
- Min. Metric Thread: 2 mm
- Min. Spindle Speed: 4 RPM
- Swing Over Cross Slide: 24 in
- Number of Inch Threads: 61
- Application: Metal Turning
- Distance Between Centers: 240 in
- Number of Metric Threads: 60
- Bed Width: 32 in
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Cutting Blade Set, Blade Type Fast Cut, Long Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Round, Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Diameter 3 1/2 in, Blade Width 1 3/8 in, 2 1/2 in, 3 1/2 in, Blade Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Overall Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Shear Blade, For Use With Grainger Item Number 30N971, 4PKV3, 5GUV7, 7DX78, For Use With Mfr. Model Number 2470-059, 2470-20, 2470-21, 48-11-2440, Fits Brand Milwaukee
Engraving Pen, General, 32,400 Blows per Minute, 1.7 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 1/4 in Min. Hose Size, Overall Length 5 4/5 in, Hose Length 79 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
This Milwaukee Quik-Lok® cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Tube and Pipe Notcher, Maximum Notch Diameter 2 3/8 in, Maximum Pipe Wall Thickness 0.134 in, Maximum Compatible Pipe Size 2 in, Minimum Compatible Pipe Size 1 1/2 in, Includes Stand No, Mounting Bench Mount, Wall Mount
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Oscillating Blades, Material Bi-Metal, Size 1-3/16 in, Overall Length 3 51/64 in, Application Drywall, Plastic, Plunge, Wood, For Use With 2426-20, 2426-21, 2426-22, 2426-22 48-11-2420, 24A483, 2626-20, AFSC 18, EET4-910-16, FMM 350Q, FMM 350Q TOP, FSC 1.6, FSC 1.6Q, Mfr. No. FMT 250Q, TM3010CX1, XMT03Z, Package Quantity 10
Contact Arm Assembly, Type 3/4 in x 5/8 in, For Use With 40320, 40321
Makita Cb-303 Carbon Brush Set Cb-303, Fits Brand Makita
Reviews
There are no reviews yet.