Sharp Lathe, 220 Volts, 30 HP, 60 Hz, 3 Phase
Original price was: $511.00.$91.99Current price is: $91.99.
Lathe, Distance Between Centers 240 in, Voltage 220V AC, Horsepower 30 hp, Min. Spindle Speed 4 RPM, Application Metal Turning, Overall Height 65 45/64 in, Overall Length 344 in, Overall Width 85 13/32 in, Max. Spindle Speed 420 RPM, Tailstock Taper MT26
Sharp #50240-32M Specifications
- Zoro #: G7686861
- Mfr #: 50240-32M
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 30
- Phase: Three
- Voltage: 220V AC
- Frequency: 60 Hz
- Swing Over Bed (In.): 50-3/8
- Horsepower: 30 hp
- Cross Feed Rates: 0.0012 to 0.14
- Swing Over Cross Slide (In.): 34-3/16
- Spindle Taper: MT-6
- Carriage Travel (In.): 240
- Number of Spindle Speeds: 16
- Tailstock Travel (In.): 3-15/16
- Swing In Gap (In.): 61-3/8
- Gap Length (In.): 67
- Coolant Tank Capacity: 10 gal.
- Thread Range (mm): 2 to 56
- Overall Length: 344 in
- Number of Threads (In.): 61
- Bed Width (In.): 7-1/4
- Spindle Bore (In.): 1
- Hz: 60
- Tailstock Taper: MT26
- Distance Between Centers (In.): 240
- Features: Alloy Steel Gears In Headstock, Electro-Magnetic Spindle Brake, Extra Bedways Support At Front of Machine, Massive One Piece Casting Machine Base, Turcite Coating On Longitudinal and Cross Slide Areas, Two Stage Spindle Start Up, Universal Gearbox
- Overall Height: 65 45/64 in
- Longitudinal Feed Rates: 0.0024 to 0.28
- Includes: (3) Jaw Chucks, Coolant System, Dead Centers and Sleeves, Electric Power Tailstock on Larger Sizes, Longitudinal Stops, Rear Spindle Chuck, Steady Rest, Toolbox with Tools
- Overall Width: 85 13/32 in
- Compound Travel (In.): 15-3/4
- Thread Range (In.): 1/4 to 30
- Number of Threads (mm): 60
- Spindle Speed (RPM): 4 to 420
- Cross Travel (In.): 23-39/64
- Min. Spindle Speed: 4 RPM
- Max. Cross Feed: 0.1400 in
- Application: Metal Turning
- Swing In Gap: 61 3/8 in
- Gap Length: 67 in
- Swing Over Cross Slide: 34 3/16 in
- Number of Inch Threads: 61
- Max. Threads per Inch: 30
- Number of Metric Threads: 60
- Distance Between Centers: 240 in
- Max. Spindle Speed: 420 RPM
- Max. Metric Thread: 56 mm
- Swing Over Bed: 50 3/8 in
- Min. Cross Feed: 0.0012 in
- Bed Width: 32 in
- Spindle Bore: 6 in
- Min. Threads per Inch: 1/4
- Min. Metric Thread: 2 mm
- Country of Origin (subject to change): Taiwan, Province of China
Related Products
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Tube and Pipe Bender Stand,37x13x14 In., Color Blue, Compatible with Manufacturer Part Number WFB2, Compatible with Product Type Manual Tube and Pipe Bender
Hook and Loop Pad, 7 in.
Makita Carbon Brush Set Cb-440, Fits Brand Makita
Cutting Blade Set, Blade Type Fast Cut, Long Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Round, Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Diameter 3 1/2 in, Blade Width 1 3/8 in, 2 1/2 in, 3 1/2 in, Blade Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Overall Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Makita Cb-303 Carbon Brush Set Cb-303, Fits Brand Makita
Engraving Pen, Industrial, 13,500 Blows per Minute, 1.1 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 3/16 in Min. Hose Size, Overall Length 5 in, Hose Length 96 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
This pack of 10 Bi-Metal Oscillating Tool Blades from Fein is a great way to keep your oscillating tool blades well-stocked. The 1 3/4" size fits most oscillating tools on the market today. Made of bi-metal, these blades are tough and durable. They have a straight cut style that makes them suitable for use with wood, metal, plastic and plasterboards. The Fein 10 Pack Bi Metal Oscillating Tool Blades are made to work hard while being kind to the environment at the same time.
Diamond Point, Replacement Point for 2Z204
Contact Arm Assembly, Type 3/4 in x 5/8 in, For Use With 40320, 40321
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Reviews
There are no reviews yet.