Slugger By Fein Compact Magnetic Drill Press, 120V
Original price was: $583.00.$97.99Current price is: $97.99.
Compact Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 1/8 in, Drill Travel 2 1/2 in, Maximum Spindle Speed 680 RPM, Minimum Spindle Speed 430 RPM, Current 6.25 A, Voltage 120V AC, Phase Single-Phase, Base Type Magnetic, Spindle Taper 3/4 in, Drill Point Pressure 1,800 lb, Power Down Feed Included No, Coolant System Yes, Tool Style Compact, Tapping Compatible No, Cord Length 12.5 ft
Slugger By Fein #JME SHORT SLUGGER Specifications
- Zoro #: G7602707
- Mfr #: JME SHORT SLUGGER
- Item: Compact Magnetic Drill Press
- Voltage: 120V AC
- Spindle Taper: 3/4 in
- Drill Travel: 2 1/2 in
- Capacity Steel: 1 3/16 in
- No Load RPM: 680
- Amps: 7.0 A
- Drill Point Pressure: 1,800 lb
- Magnet Type: Electro
- Overall Height: 11 in
- Corded/Cordless: Corded
- Reversible: No
- Drill to Center From Base: 1 7/8 in
- Tool Length: 9 1/2 in
- Tool Weight: 22.0 lb
- Includes: (1) Chip Hook, (2) Centering Pins, Case, Coolant Tank, Safety Guard, Safety Strap, Wrench
- Corded/Banded: Corded
- Features: Concealed Motor Wiring Prevents Wires from Snagging or Getting Caught on the Workpiece, Easy Guide Adjustment, Extremely Compact with Perfect Power-To-Weight Ratio for Work at Height and in Tight Spaces, Feed Handwheel Can be Moved from One Side to the other for Use in Special Work Situations, Internal Cooling
- Motor HP: 1 1/4 hp
- Minimum Working Speed: 680 RPM
- Phase: Single-Phase
- Drilling Capacity in Steel: 1 1/8 in
- Drilling Capacity in Aluminum: 1 1/8 in
- Tool Style: Compact
- Magnetic Force: 8,000 N
- Base Type: Magnetic
- Spindle Travel: 2 in
- Drilling Capacity in Stainless Steel: 1 1/8 in
- Minimum Spindle Speed: 430 RPM
- Application: Drilling
- Drilling Capacity in Masonry: 1 1/8 in
- Minimum Core Bit Compatibility: 3/4 in
- Maximum Spindle Speed: 680 RPM
- Power Down Feed Included: No
- Overall Length: 9 1/2 in
- Tapping Compatible: No
- Number of Pieces: 10
- Var. Speed: Variable Speed
- Cord Length: 12.5 ft
- Power Source: Corded
- Maximum Core Bit Compatibility: 1 1/8 in
- Coolant System: Yes
- Variable Speed: Yes
- Current: 6.25 A
- Maximum Working Speed: 680 RPM
- Spindle Speed: 430 RPM – 680 RPM
- Country of Origin (subject to change): India
Related Products
Magnetic Drill Press, Magnet Type Permanent, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 750 lb, Power Down Feed Included Yes, Coolant System Yes
This heavy duty magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0 to 850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites.
Electric Drill,1/2 In,450 rpm,7.0A
This powerful 8.0 amp 1/2 in. drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
Power and torque, that's about all that needs to be said about the hole-haw line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4-5/8 in. Selfeed bit. An extra long pipe handle helps you control the power. Features two speed ranges, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy duty user. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs.
Floor Drill Press, Primary Material Application Metal, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Drilling, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 20 in, Spindle-to-Column Distance 10 in, Horsepower 1 1/2 hp, Voltage 115/230V AC, Spindle Taper MT3, Number of Speeds 12, Chuck Size 3/4 in, Chuck Style Keyed, Guard Included Yes, Coolant System No, Quill Diameter 2 7/16 in, Drilling Capacity in Steel 5/8 in
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1000, 8.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 1/8 in, Tool Weight 4.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes Side Handle
General Purpose Drill Presses, Bench Drill Press, Drive Type Belt, Swing 10 in, Spindle Taper 33JT, Motor HP 1/3 hp, Capacity Steel 3/8 in, Capacity Cast Iron 1/2 in, Drilling Capacity Wood Not Specified, Includes Arbor, Chuck, Paddle Switch, Spindle Depth Stop, Tilting Table, Power Down Feed Included No, Voltage 120, Amps AC 4.1, Number of Speeds 5, Chuck Size 1/2 in, Spindle Speed 650 to 3070 rpm, Spindle Travel 2 1/2 in, Base Size 8-1/4 in x 13-1/2 in
Drill Kit, Handle Style D-Handle, Chuck Size 1/2 in, No Load RPM 0 to 600/0 to 900, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 16 1/4 in, Tool Weight 10.3 lb, Gear Train Quadruple, Switch Type Trigger, Reversible Yes, Cord Length 8 ft, Features Carrying Case, Head and Handle Swivel 360 Degrees , Side Handle, Includes (1) Carrying Case, (1) RAD Assembly, (1) Side Handle
With a powerful 8.0 amp motor and 0-2, 800 RPM, the 3/8 in. drill has the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications. The power and durability of Milwaukee's 3/8 in. drill make it the perfect tool for metal drilling, wood drilling and fastening applications.
Cordless Expansion Tool Kit, Battery Included, Voltage 12.0 V, M12(TM) ProPEX(R) Series, Capacity Tubing O.D. 3/8 in to 1 in, Handle Style Right Angle, Cordless, Tool Length 7 1/2 in, Tool Weight 4.5 lb, Cordless Tool Battery Type Li-Ion, Battery Capacity 1.5 Ah, Features Built-in Auto Rotation, Integrated Metal Housing and All-Metal Gearing, One-Handed Expansion, Precision Expansion with Rapid Return, Tool-Free Head Change Compatible with Milwaukee and Uponor Heads
Reviews
There are no reviews yet.