Slugger By Fein Magnetic Drill Kit, Li-Ion, 18.0V
Original price was: $428.00.$92.99Current price is: $92.99.
Magnetic Drill Kit, Battery Included, Voltage 18.0 V, Spindle Taper 2 MT, Battery Capacity 5.2 Ah, No Load RPM 130/520, Drill Travel 4 7/8 in, Cordless Tool Battery Type Li-Ion, Magnet Type Permanent, Drill Point Pressure 2,000 lb, Series AJMU, Drill to Center From Base 1 1/2 in, Overall Height 15 1/2 in, Tool Length 12 in, Tool Weight 28.2 lb, Chuck Size 3/4 in, Reversible Yes, Battery Included Mfr. No. 92604179020, Battery Pack Replacement Mfr. No. 92604179020, Brushless Motor Yes
Slugger By Fein #AJMU137 PMQW Specifications
- Zoro #: G6552347
- Mfr #: AJMU137 PMQW
- Item: Magnetic Drill Kit
- Voltage: 18.0 V
- Spindle Taper: 2 MT
- Drill Travel: 4 7/8 in
- No Load RPM: 130/520
- Drill Point Pressure: 2,000 lb
- Magnet Type: Permanent
- Overall Height: 15 1/2 in
- Battery Capacity: 5.2 Ah
- Cordless Tool Battery Type: Li-Ion
- Corded/Cordless: Cordless
- Included Charger: Mfr. No. 92604131010
- Reversible: Yes
- Drill to Center From Base: 1 1/2 in
- Chuck Size: 3/4 in
- Includes: (2) Batteries, Carrying Case, Centering Pin, Charger, Chip Hook, Coolant Pump, Safety Strap, Touch Guard
- Charger Replacement: Mfr. No. 92604131010
- Corded/Banded: Cordless
- Brushless Motor: Yes
- Battery Included: Mfr. No. 92604179020
- Series: AJMU
- Tool Length: 12 in
- Battery Pack Replacement: Mfr. No. 92604179020
- Tool Weight: 28.2 lb
- Features: Electronic Speed Control, FEIN SafetyCell Technology, Flexible Drilling Operations, Tilt Sensor
- Power Source: Cordless
- Battery Series: M18
- Chuck Style: 3/4 in Weldon
- Base Type: Fixed
- Spindle Travel: 4 7/8 in
- Drilling Capacity in Cast Iron: 5/8 in
- Motor Type: Brushless
- Variable Speed: No
- Tapping Compatible: Yes
- Number of Pieces: 10
- Maximum Spindle Speed: 520 RPM
- Tool Style: Compact
- Charger Included: Yes
- Overall Length: 12 1/2 in
- Overall Width: 7 1/2 in
- Minimum Spindle Speed: 130 RPM
- Power Down Feed Included: No
- Magnetic Force: 2,023 lbf
- Battery Model No.: (2) 92604179020
- Spindle Speed Range: 130 RPM – 520 RPM
- Charger Model Number: ALG 80
- Coolant System: Yes
- Drilling Capacity in Steel: 1 3/8 in
- Number of Batteries Included: 2
- Cordless Tool Kit Contents: (1) Bare Tool, (2) Batteries, (1) Charger
- Spindle-to-Base Distance: 1 1/2 in
- Shop By: Hot Buys
- Country of Origin (subject to change): Germany
Related Products
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.
Switch, For Use With Mfr. Model Number 11216 EVS, Fits Brand Bosch
Floor Drill Press, Primary Material Application Metal, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Drilling, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 20 in, Spindle-to-Column Distance 10 in, Horsepower 1 1/2 hp, Voltage 115/230V AC, Spindle Taper MT3, Number of Speeds 12, Chuck Size 3/4 in, Chuck Style Keyed, Guard Included Yes, Coolant System No, Quill Diameter 2 7/16 in, Drilling Capacity in Steel 5/8 in
Power and torque, that's about all that needs to be said about the hole-haw line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4-5/8 in. Selfeed bit. An extra long pipe handle helps you control the power. Features two speed ranges, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy duty user. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs.
This powerful 8.0 amp 1/2 in. drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
Coring Rigs and Drills, Diamond Coring Rig, Motor HP 2 3/10 hp, 15.0 A Amps, No Load RPM 540, Core Bit Cap Concrete 6 in, Overall Height 33 in, Base Size 10-1/2 in x 16-1/4 in, Column Dia. 1-3/4 in x 2-1/2 in, Column Height 31 in, Tool Weight 51.0 lb, Corded, Overall Depth 19 in, Overall Width 10 1/2 in, Voltage 120/240V AC, Features Mechanical Clutch, Single Speed Gearbox And Electronic Overload Protection, V-Groove Roller Carriage, Includes Vacuum Plate
Drill Kit, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2500, 8.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 12 3/4 in, Tool Weight 4.1 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 2-Conductor, Includes Belt Hook, Heavy-Duty Kit Bag. The DWD110K 3/8" VSR Pistol Grip Drill Kit with Keyless Chuck has a powerful 8 Amp motor to deliver 0-2,500 rpm speed for heavy-duty applications. Features solid bit retention and a soft grip handle design for comfort.
Diamond coring motors are used with Vac-U-Rig® and mooring diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 300 RPM or 600 RPM operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 in. to 14 in. in diameter.
Magnetic Drill Press, Magnet Type Permanent, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 750 lb, Power Down Feed Included Yes, Coolant System Yes
This heavy duty magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0 to 850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites.
With a powerful 8.0 amp motor and 0-2, 800 RPM, the 3/8 in. drill has the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications. The power and durability of Milwaukee's 3/8 in. drill make it the perfect tool for metal drilling, wood drilling and fastening applications.
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2800, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 10 in, Tool Weight 3.6 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Compact and Lightweight Design, Lock-On, Includes Chuck Key. The DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 Amp motor drills at high speed according to the user's desired setting.
Reviews
There are no reviews yet.