Slugger By Fein Magnetic Drill Press, 5/8 in. Chuck
Original price was: $412.00.$94.99Current price is: $94.99.
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 7/8 in, Drilling Capacity in Cast Iron 7/8 in, Drill Travel 12 3/8 in, Maximum Spindle Speed 520 RPM, Minimum Spindle Speed 130 RPM, Current 11 A, Voltage 120V AC, Phase Single-Phase, Base Type Magnetic, Spindle Taper MT3, Chuck Size 5/8 in, Chuck Style Keyed, Drill Point Pressure 2,750 lb, Power Down Feed Included Yes, Coolant System Yes, Tool Style Large
Slugger By Fein #JCM 200 AUTO Specifications
- Zoro #: G8452236
- Mfr #: JCM 200 AUTO
- Item: Magnetic Drill Press
- Voltage: 120V AC
- Spindle Taper: MT3
- Drill Travel: 12 3/8 in
- Capacity Steel: 2 in
- No Load RPM: 260/520
- Amps: 11.0 A
- Drill Point Pressure: 2,750 lb
- Magnet Type: Electro
- Overall Height: 15 9/16 in
- Corded/Cordless: Corded
- Tap Size Capacity: 1/2 in
- Chuck Size: 5/8 in
- Tool Length: 12 7/32 in
- Corded/Banded: Corded
- Includes: Drill, Case, Coolant Pump, Safety Strap, Chip Hook, Pilot Pin (4-1/8 in) and (1) Guard
- Tool Weight: 35.7 lb
- Motor HP: 2 hp
- Drill to Center From Base: 2 in
- Reversible: No
- Features: Auto-Feed, Integrated Cooling Tank, Reversible Hand Feeds, Used for 3/4 in Shank Cutters, Variable 2 Speed Drill Allows Motor to Slow Down for Harder Materials
- Power Down Feed Included: Yes
- Tapping Capacity in Aluminum: 5/8 in
- Variable Speed: Yes
- Coolant System: Yes
- Magnetic Force: 12,500 N
- Phase: Single-Phase
- Current: 11 A
- Var. Speed: Variable Speed
- Number of Pieces: 7
- Tapping Compatible: Yes
- Chuck Style: Keyed
- Tapping Capacity in Steel: 5/8 in
- Power Source: Corded
- Spindle Speed: 130 RPM – 520 RPM
- Application: Drilling
- Maximum Spindle Speed: 520 RPM
- Maximum Core Bit Compatibility: 2 in
- Minimum Core Bit Compatibility: 1 5/8 in
- Number of Spindle Speeds: 2
- Drilling Capacity in Steel: 1 5/8 in
- Base Type: Magnetic
- Tapping Capacity in Wood: 5/8 in
- Drilling Capacity in Stainless Steel: 1 5/8 in
- Tapping Capacity in Masonry: 5/8 in
- Cord Length: 4 ft
- Drilling Capacity in Wood: 7/8 in
- Overall Length: 12 1/4 in
- Tapping Capacity in Cast Iron: 5/8 in
- Drilling Capacity in Cast Iron: 7/8 in
- Minimum Working Speed: 130 RPM
- Tool Style: Large
- Maximum Working Speed: 520 RPM
- Minimum Spindle Speed: 130 RPM
- Country of Origin (subject to change): Germany
Related Products
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 800 lb, Power Down Feed Included Yes, Coolant System Yes, Tool Style Large
Electric Drill,1/2 In,450 rpm,7.0A
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1000, 8.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 1/8 in, Tool Weight 4.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes Side Handle
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.
Power and torque, that's about all that needs to be said about the hole-haw line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4-5/8 in. Selfeed bit. An extra long pipe handle helps you control the power. Features two speed ranges, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy duty user. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs.
Diamond coring motors are used with Vac-U-Rig® and mooring diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 300 RPM or 600 RPM operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 in. to 14 in. in diameter.
Drill Press Guard, Guard Style Telescoping, For Quill Diameter 1 3/4 in to 3 in, Guard Shape Curved, Guard Height 3 1/2 in to 6 1/4 in, Guard Width 4 5/8 in, Mount Type Drill-to-Fit, Body Material Polycarbonate
Magnetic Drill Press, Magnet Type Permanent, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 750 lb, Power Down Feed Included Yes, Coolant System Yes
This powerful 8.0 amp 1/2 in. drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
Drill, Handle Style Spade, Chuck Size 1/2 in, No Load RPM 0 to 550, 9.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 15 1/2 in, Tool Weight 7.5 lb, Gear Train Triple, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 2-Conductor, Includes 2-Position Rear and 3-Position Side Handles and Holder
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 in, Spindle Taper 2MT, Motor HP 1 hp, Capacity Steel 5/8 in, Capacity Cast Iron 3/4 in, Drilling Capacity Wood Not Specified, Includes Motor, Drill Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 10.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 240 to 3200 rpm, Spindle Travel 3 5/32 in, Base Size 18 in x 11 in, Table Work Surface 12 in x 12 in, Hz 60, Phase 1, Number of T-Slots 2
With a powerful 8.0 amp motor and 0-2, 800 RPM, the 3/8 in. drill has the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications. The power and durability of Milwaukee's 3/8 in. drill make it the perfect tool for metal drilling, wood drilling and fastening applications.
Reviews
There are no reviews yet.