Slugger By Fein Magnetic Drill Press, 520 RPM, 9.2 A
Original price was: $483.00.$93.99Current price is: $93.99.
Magnetic Drill Press, Magnet Type Permanent, Variable Speed Yes, Drilling Capacity in Steel 1 3/8 in, Drilling Capacity in Wood 3/4 in, Drilling Capacity in Cast Iron 3/4 in, Drill Travel 5 5/16 in, Maximum Spindle Speed 520 RPM, Minimum Spindle Speed 130 RPM, Current 9.2 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper MT2, Chuck Size 3/4 in, Chuck Style Keyed, Drill Point Pressure 2,000 lb, Power Down Feed Included No, Coolant System Yes, Tool Style Compact
Slugger By Fein #72705661120 Specifications
- Zoro #: G401209825
- Mfr #: 72705661120
- Item: Magnetic Drill Press
- Spindle Taper: MT2
- Drill Travel: 2 in
- Magnet Type: Permanent
- Corded/Cordless: Corded
- Tap Size Capacity: 9/16 in
- Chuck Size: 3/4 in
- Features: Electronic Speed Reduction; Magnet Holding Force Gauge; Memory Function; Speed-Controlled Tacho Electronics; Tip Sensor
- Reversible: Yes
- Tool Weight: 24.2 lb
- Includes: Case; Chip Guard; Chip Hook; Coolant Tank; Pilot Pin; Safety Strap
- Tool Style: Compact
- Phase: Single-Phase
- Power Source: Corded
- Variable Speed: Yes
- Current: 9.2 A
- Drilling Capacity in Cast Iron: 3/4 in
- Plug Type: Two-Prong
- Var. Speed: Variable Speed
- Base Type: Fixed
- Power Down Feed Included: No
- Cord Length: 13.1 ft
- Minimum Spindle Speed: 130 RPM
- Drilling Capacity in Wood: 3/4 in
- Coolant System: Yes
- Maximum Spindle Speed: 520 RPM
- Spindle Speed: 130 RPM – 520 RPM
- Drilling Capacity in Steel: 1 3/8 in
- Tapping Compatible: No
- Chuck Style: Keyed
- Country of Origin (subject to change): Germany
Related Products
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 1200, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes (1) Chuck Key With Holder
The most powerful single-speed hammer drill on the market, with up to 2X more durability. This practical 8 amp, 1/2 in. dual-mode hammer drill offers power and versatility for a variety of tough jobs, with an impressive 0-2,800 RPMs and 0-48.000 Bpms. Superior engineering, an all-metal gear case and a heavy-duty metal chuck make this twice as durable as the leading competitor while maintaining outstanding performance. The compact 11.5 in. profile lets you work in tight spaces, and the two modes accommodate drilling in wood, steel and plastic or hammer drilling in concrete. A removable 360° side handle helps you set the depth rod for pre-set hole drilling. Over-molding ensures a surer, more comfortable grip and minimizes vibration and fatigue on the jobsite.
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 800 lb, Power Down Feed Included Yes, Coolant System Yes, Tool Style Large
Drill Press Guard, Guard Style Telescoping, For Quill Diameter 1 3/4 in to 3 in, Guard Shape Curved, Guard Height 3 1/2 in to 6 1/4 in, Guard Width 4 5/8 in, Mount Type Drill-to-Fit, Body Material Polycarbonate
Electric Drill,1/2 In,450 rpm,7.0A
Drill, Handle Style T-Handle, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyless, Tool Length 11 in, Tool Weight 5.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD215G 1/2" VSR Mid-Handle Grip Drill with Keyless Chuck has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2800, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 10 in, Tool Weight 3.6 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Compact and Lightweight Design, Lock-On, Includes Chuck Key. The DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 Amp motor drills at high speed according to the user's desired setting.
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 in, Spindle Taper 2MT, Motor HP 1 hp, Capacity Steel 5/8 in, Capacity Cast Iron 3/4 in, Drilling Capacity Wood Not Specified, Includes Motor, Drill Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 10.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 240 to 3200 rpm, Spindle Travel 3 5/32 in, Base Size 18 in x 11 in, Table Work Surface 12 in x 12 in, Hz 60, Phase 1, Number of T-Slots 2
The JET 350018 Mill Drill Machine is the high-quality machine that will make your work easier. It comes with a variety of features to help you get the job done quickly and efficiently. With its 2 HP TEF. UL LISTED motor, this mill drill machine has more power than most other models on the market. The belt cover with quick slide latch makes it easy to open and close the cover without any hassle. The base taper provides greater stability while working on heavy pieces of material. This mill drill machine also comes with an R8 spindle taper, which is designed for precision cutting and grinding jobs. The JET 350018 Mill Drill Machine is built to last so you can rely on it in your workshop or factory for years to come.
Drill Kit, Handle Style D-Handle, Chuck Size 1/2 in, No Load RPM 0 to 600/0 to 900, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 16 1/4 in, Tool Weight 10.3 lb, Gear Train Quadruple, Switch Type Trigger, Reversible Yes, Cord Length 8 ft, Features Carrying Case, Head and Handle Swivel 360 Degrees , Side Handle, Includes (1) Carrying Case, (1) RAD Assembly, (1) Side Handle
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
Reviews
There are no reviews yet.