Slugger By Fein Magnetic Drill Press Kit, Var 2 Sp
Original price was: $534.00.$92.99Current price is: $92.99.
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 4 in, Drilling Capacity in Wood 1 in, Drilling Capacity in Cast Iron 1 in, Drill Travel 8 7/16 in, Maximum Spindle Speed 450 RPM, Minimum Spindle Speed 100 RPM, Current 11.7 A, Voltage 120V AC, Phase Single-Phase, Base Type Magnetic, Spindle Taper MT3, Chuck Size 3/4 in, Chuck Style Keyed, Drill Point Pressure 4,833 lb, Power Down Feed Included No, Coolant System Yes, Tool Style Large, Tapping Compatible No
Slugger By Fein #JMU 4 X 4 Specifications
- Zoro #: G2446683
- Mfr #: JMU 4 X 4
- Item: Magnetic Drill Press
- Voltage: 120V AC
- Spindle Taper: MT3
- Drill Travel: 8 7/16 in
- Capacity Steel: 4 in
- No Load RPM: 150 to 220/290 to 450
- Amps: 11.7 A
- Drill Point Pressure: 4,833 lb
- Magnet Type: Electro
- Overall Height: 31 1/2 in
- Corded/Cordless: Corded
- Includes: Cutter Shield, Safety Strap, Storage Case
- Drill to Center From Base: 2 9/16 in
- Motor HP: 1 4/5 hp
- Tool Weight: 73.0 lb
- Tap Size Capacity: 1 1/8 in
- Corded/Banded: Corded
- Tool Length: 16 in
- Features: Magnet Circuitry Prevents Drill Motor from Starting on Non-Ferrous Material or Ferrous Material that is TooThin to Allow Proper Magnetic Adhesion and will also Shut Motor Down if Magnet Should Break Free from the Work
- Reversible: No
- Tapping Capacity in Cast Iron: 1 1/8 in
- Minimum Working Speed: 100 RPM
- Tapping Compatible: No
- Drilling Capacity in Cast Iron: 1 in
- Tapping Capacity in Wood: 1 1/8 in
- Coolant System: Yes
- Current: 11.7 A
- Tapping Capacity in Aluminum: 1 1/8 in
- Drilling Capacity in Aluminum: 4 in
- Var. Speed: Variable Speed
- Drilling Capacity in Steel: 4 in
- Drilling Capacity in Stainless Steel: 3 7/8 in
- Minimum Spindle Speed: 100 RPM
- Power Down Feed Included: No
- Drilling Capacity in Wood: 1 in
- Power Source: Corded
- Base Type: Magnetic
- Tapping Capacity in Masonry: 1 1/8 in
- Drilling Capacity in Masonry: 4 in
- Maximum Working Speed: 310 RPM
- Magnetic Force: 21,500 N
- Number of Pieces: 7
- Phase: Single-Phase
- Tool Style: Large
- Number of Spindle Speeds: 4
- Application: Drilling
- Chuck Style: Keyed
- Maximum Spindle Speed: 450 RPM
- Cord Length: 12.5 ft
- Maximum Core Bit Compatibility: 4 in
- Spindle Speed: 100 RPM – 450 RPM
- Tapping Capacity in Steel: 1 1/8 in
- Variable Speed: Yes
- Country of Origin (subject to change): Poland
Related Products
Cordless Expansion Tool Kit, Battery Included, Voltage 12.0 V, M12(TM) ProPEX(R) Series, Capacity Tubing O.D. 3/8 in to 1 in, Handle Style Right Angle, Cordless, Tool Length 7 1/2 in, Tool Weight 4.5 lb, Cordless Tool Battery Type Li-Ion, Battery Capacity 1.5 Ah, Features Built-in Auto Rotation, Integrated Metal Housing and All-Metal Gearing, One-Handed Expansion, Precision Expansion with Rapid Return, Tool-Free Head Change Compatible with Milwaukee and Uponor Heads
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2800, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 10 in, Tool Weight 3.6 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Compact and Lightweight Design, Lock-On, Includes Chuck Key. The DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 Amp motor drills at high speed according to the user's desired setting.
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1200, 10.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Metal Housing, Soft Grip Handle, Includes Holder. The DWD220 1/2" VSR Pistol Grip Drill with E-Clutch Anti-Lock Control has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
Swing Away Safety Guard, Max. Chuck Dia. (In.) 4 in, Max. Stroke (In.) 7 in, Min. Stroke (In.) 3 in, White
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
The MILWAUKEE® M18 FUELTM SUPER HAWG® 1/2" Right Angle Drill delivers next-generation performance with the power and speed to replace corded right angle drills. The cordless right angle drill generates corded power, works as fast as the corded competition, and delivers up to 100 2-9/16" holes through 6" beams per battery charge on an M18TM REDLITHIUMTM HIGH OUTPUTTM 6.0AH battery (not included). The Milwaukee SUPER HAWG® has a POWERSTATETM Brushless Motor, REDLINK PLUSTM electronics, and is powered by REDLITHIUMTM HIGH OUTPUTTM Batteries. The drill's all-metal 1/2" keyed chuck provides ultimate durability and long tool life. An all-metal side handle and LED light ensures optimal control and visibility. The M18 FUELTM SUPER HAWG® delivers the performance and run-time to complete single-family home rough-ins or the ability to rough-in multiple multi-family units on a single charge.
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.
Diamond coring motors are used with Vac-U-Rig® and mooring diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 300 RPM or 600 RPM operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 in. to 14 in. in diameter.
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
This powerful 8.0 amp 1/2 in. drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
Power and torque, that's about all that needs to be said about the hole-haw line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4-5/8 in. Selfeed bit. An extra long pipe handle helps you control the power. Features two speed ranges, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy duty user. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs.
The JET 350018 Mill Drill Machine is the high-quality machine that will make your work easier. It comes with a variety of features to help you get the job done quickly and efficiently. With its 2 HP TEF. UL LISTED motor, this mill drill machine has more power than most other models on the market. The belt cover with quick slide latch makes it easy to open and close the cover without any hassle. The base taper provides greater stability while working on heavy pieces of material. This mill drill machine also comes with an R8 spindle taper, which is designed for precision cutting and grinding jobs. The JET 350018 Mill Drill Machine is built to last so you can rely on it in your workshop or factory for years to come.
Reviews
There are no reviews yet.