Tomahawk Power 8" Concrete Scarifier Planer Grinder 5.5HP Honda Engine OSHA Compliant
Original price was: $509.00.$95.99Current price is: $95.99.
The Tomahawk TSCAR-8H Gas Scarifier is perfect for sidewalk trip hazard repair, floor cleaning and preparation, as well as, concrete, coating, traffic line, and marking removal. Powered by an incredible 5.5 HP Honda engine, easily scarify, level, and smooth approximately 350-500 sq. ft. per hour of concrete surface at a depth per pass of 1/8 in. <strong>FEATURES</strong> • Air-cooled 163cc / 5.5 HP Honda GX160 Engine • Scarifies 350 – 500 ft2/hour at 1/8" Depth Per Pass • Remove traffic lines at 800 – 1,000 linear feet per hour • Engine raised over drum to maximize surface contact • OSHA Approved vacuum port to reduce silica dust equipped to fit most bags • 3 Year Engine Warranty and 1 Year Product Warranty – See Manual for Details
Tomahawk Power #TSCAR-8H Specifications
- Zoro #: G0114137
- Mfr #: TSCAR-8H
- Voltage: 5.5
- Size: Working Width
- HP: 5.5
- For Use With: Surface And Marking Removal
Surface Leveling
Sidewalk And Trip Hazard Repair
Floor Grinding
Concrete Grinding
Traffic Line Removal
Asphalt And Concrete Line Removal
Concrete Edging
Surface Texturing And Grooving
Cleaning And Texturing Concrete And Asphalt
Concrete Reduction And Scabbing
Removal Of Roof Chippings
Grooving Applications
Cleaning Concrete Form-Work And Shuttering
Non-Slip Finishes
Removal Of Coatings And Plaster - Number of Speeds: 8 – 1, linear feet per hour
- Features: Engine
- Thickness: 8 Inch
- Application: Honda GX16
- Finish: Horse Power
- Capacity: Cutting Depth
- Speed: 8 – 1, linear feet per hour
- Standards: 1/8 Inch
- Country of Origin (subject to change): United States
Related Products
This pack of 10 Bi-Metal Oscillating Tool Blades from Fein is a great way to keep your oscillating tool blades well-stocked. The 1 3/4" size fits most oscillating tools on the market today. Made of bi-metal, these blades are tough and durable. They have a straight cut style that makes them suitable for use with wood, metal, plastic and plasterboards. The Fein 10 Pack Bi Metal Oscillating Tool Blades are made to work hard while being kind to the environment at the same time.
This Milwaukee Quik-Lok® cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
The Tomahawk TSCAR6TCC tungsten carbide drum kit is perfect for sidewalk trip hazard repair, floor cleaning and preparation, as well as, concrete, coating, traffic line, and marking removal. With the Tomahawk TSCAR-8H easily scarify, level, and smooth approximately 350-500 sq. ft. per hour of concrete surface at a depth per pass of 1/8 in. TSCAR-8H Concrete Scarifier sold separately. <strong>FEATURES</strong> • 6 Tip Tungsten Carbide Tips • 6,000 – 10,000 ft2 Blade / Drum Lifetime • Depth: 1/8 in. per pass • 128 hardened washers and 64 carbide cutters • Rough surface texture 7-3/4 in. path • Longer life than steel tooth cutters
Makita Cb-303 Carbon Brush Set Cb-303, Fits Brand Makita
Planer, Voltage 230, 2 Speed, Motor HP 5 hp, 23 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20,000, Feed Rates (FPM) 24/31, No Load RPM 5,000 RPM, Helical Cutter Head, Motor Phase 1, Two Speed Gearbox, Cast Iron, Overall Depth (In.) 44 in, Overall Height (In.) 23 in, Overall Width (In.) 28 in
Contact Arm Assembly, Type 3/4 in x 5/8 in, For Use With 40320, 40321
Electric Engraver, Strokes per Minute 2200, 0.5 Amps @ 120V, 2 Speed Switch, For Use With Diamond Wheel Point, Engraving Metal, Leather, Plastic, Woods, Dial 5-Position Calibrated Stroke Adjustment, Regulates Engraving Depth, Yes Soft Grip, Tool Length 5.014 in, Tool Weight 0.45 lb, UL Listed
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Engraver, Strokes per Minute 3600/7200, 2 Speed Switch, Engraves Most Surfaces, No Soft Grip, Tool Length 7.25 in, Tool Weight 0.4 lb, Includes Electric Cord, Engraving Tip
Engraving Pen, General, 32,400 Blows per Minute, 1.7 CFM @ Full Load, Required Pressure 90 psi, Air Inlet 1/4 in NPT, 1/4 in Min. Hose Size, Overall Length 5 4/5 in, Hose Length 79 in, Throttle Twist Ring, Variable Speed, Aluminum Housing
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Cutting Blade Set, Blade Type Fast Cut, Long Cut, Plunge Cut, Connection Style Universal Open-Back, Blade Shape Round, Straight, Blade Material Bi-Metal, High Carbon Steel, Blade Diameter 3 1/2 in, Blade Width 1 3/8 in, 2 1/2 in, 3 1/2 in, Blade Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Overall Length 2 5/8 in, 3 9/16 in, 3 11/16 in, 4 1/16 in, Maximum Oscillations per Minute 20,000
Reviews
There are no reviews yet.