Trademark Global Inc Trademark 75-PT1037 Electric Power Drill with 6 ft. Cord
Original price was: $52.56.$40.47Current price is: $40.47.
<p>Never worry about having to charge weak or dead batteries with the Corded Power Drill by Stalwart. The handle is ergonomic and comes with a rubberized coating to enhance comfort and reduce user fatigue. The six-foot long power cord will give you plenty of room to work while providing a constant power supply. The drill has a 3/8 keyless chuck for fast, convenient bit installation and removal. The drill comes with both wood and steel drill bits, as well as screwdriving bits and a bit extension. The entire kit comes in a hard plastic carrying case to keep the accessories organized and make the kit ideal for travel. The drill itself features a built-in bubble level. This allows you to make sure pilot holes and screws are plumb and straight every time, preventing splintered lumber and ensuring safe and sturdy construction. </p><p>Keyless Chuck – This drill comes equipped with a 3/8 keyless chuck for fast and convenient bit and driver installation or removal. Simply twist the chuck ring either direction to loosen or tighten the grip and insert or remove the bit. </p><p>Carrying Case – The entire kit comes in a hard-plastic case with carrying handle. Each driver and bit fits into its own storage slot to keep your toolkit organized and ready to travel with you. It's great to keep in your truck, RV or garage. </p><p>Bubble Level – This electric drill has a built-in bubble level. This allows you to make sure pilot holes and screws are plumb and straight every time, preventing splintered lumber and ensuring safe and sturdy construction. </p><p>Corded Power Supply – You'll never have to worry about having to charge weak or dead batteries with this corded power drill. The six-foot length will give you plenty of room to work while providing a constant power supply. </p><strong>Features</strong><ul><li>Electric Power Drill with Cord</li><li>Variable Speed</li><li>Reversable Wired Screwdriver with Bubble Level</li><li>Carrying Case and Accessories by Stalwart</li><li>Voltage Tester</li></ul><strong>Specifications</strong><ul><li><strong>Szie:</strong> 6'</li><li><strong>Drill Dimension:</strong> 8.75" L x 2.5" W x 7" H</li><li><strong>Case Dimension:</strong> 12.5 L x 3 W x 11.5 H</li><li><strong>Weight:</strong> 5.7 lbs</li></ul>
Trademark Global Inc #75-PT1037 Specifications
- Zoro #: G304163569
- Mfr #: 75-PT1037
- Country of Origin (subject to change): China
Related Products
The most powerful single-speed hammer drill on the market, with up to 2X more durability. This practical 8 amp, 1/2 in. dual-mode hammer drill offers power and versatility for a variety of tough jobs, with an impressive 0-2,800 RPMs and 0-48.000 Bpms. Superior engineering, an all-metal gear case and a heavy-duty metal chuck make this twice as durable as the leading competitor while maintaining outstanding performance. The compact 11.5 in. profile lets you work in tight spaces, and the two modes accommodate drilling in wood, steel and plastic or hammer drilling in concrete. A removable 360° side handle helps you set the depth rod for pre-set hole drilling. Over-molding ensures a surer, more comfortable grip and minimizes vibration and fatigue on the jobsite.
When you need to drill a hole in concrete, this Milwaukee 4096 Diamond Coring Motor is the perfect tool for the job. The high-performance motor has a 4 4/5 hp and will deliver 450/900 RPM. The water swivel allows you to twist the cord into a position that prevents tangling and kinking. Clutch protection ensures that the core bit is not damaged by sudden stops or starts when drilling through concrete. This diamond coring rig motor has 20 amps and 120V AC voltage. It is corded and comes with a 10 in. core bit cap for concrete work. It also features an ergonomic handle with trigger switch for easy operation, as well as built-in overload protection that protects against overheating or burning out of your tool due to overload conditions on the job site. The Milwaukee Diamond Coring Rig Motor is one of those tools you just can't live without once you have used it.
Drill, Handle Style Pistol Grip, Chuck Size 3/8 in, No Load RPM 0 to 2800, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 10 in, Tool Weight 3.6 lb, Gear Train Single, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Compact and Lightweight Design, Lock-On, Includes Chuck Key. The DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 Amp motor drills at high speed according to the user's desired setting.
General Purpose Drill Presses, Bench Drill Press, Drive Type Belt, Swing 10 in, Spindle Taper 33JT, Motor HP 1/3 hp, Capacity Steel 3/8 in, Capacity Cast Iron 1/2 in, Drilling Capacity Wood Not Specified, Includes Arbor, Chuck, Paddle Switch, Spindle Depth Stop, Tilting Table, Power Down Feed Included No, Voltage 120, Amps AC 4.1, Number of Speeds 5, Chuck Size 1/2 in, Spindle Speed 650 to 3070 rpm, Spindle Travel 2 1/2 in, Base Size 8-1/4 in x 13-1/2 in
Drill Press Guard, Guard Style Telescoping, For Quill Diameter 1 3/4 in to 3 in, Guard Shape Curved, Guard Height 3 1/2 in to 6 1/4 in, Guard Width 4 5/8 in, Mount Type Drill-to-Fit, Body Material Polycarbonate
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1200, 10.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Metal Housing, Soft Grip Handle, Includes Holder. The DWD220 1/2" VSR Pistol Grip Drill with E-Clutch Anti-Lock Control has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.
Floor Drill Press, Primary Material Application Metal, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Drilling, Speed Control Fixed, Speed Adjustment Step Pulley, Swing 20 in, Spindle-to-Column Distance 10 in, Horsepower 1 1/2 hp, Voltage 115/230V AC, Spindle Taper MT3, Number of Speeds 12, Chuck Size 3/4 in, Chuck Style Keyed, Guard Included Yes, Coolant System No, Quill Diameter 2 7/16 in, Drilling Capacity in Steel 5/8 in
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1000, 8.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 1/8 in, Tool Weight 4.2 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes Side Handle
This heavy duty magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0 to 850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites.
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 800 lb, Power Down Feed Included Yes, Coolant System Yes, Tool Style Large
Cordless Expansion Tool Kit, Battery Included, Voltage 12.0 V, M12(TM) ProPEX(R) Series, Capacity Tubing O.D. 3/8 in to 1 in, Handle Style Right Angle, Cordless, Tool Length 7 1/2 in, Tool Weight 4.5 lb, Cordless Tool Battery Type Li-Ion, Battery Capacity 1.5 Ah, Features Built-in Auto Rotation, Integrated Metal Housing and All-Metal Gearing, One-Handed Expansion, Precision Expansion with Rapid Return, Tool-Free Head Change Compatible with Milwaukee and Uponor Heads
Reviews
There are no reviews yet.