U.S.Saws 7" Hand-held Grinder
Original price was: $419.00.$98.99Current price is: $98.99.
The U.S.SAWS 7” Grinder-vac is a hand-held concrete surface grinder that is designed to prepare concrete surfaces for coatings and collect the dust at the same time while hooked up to a vacuum. This grinder is considered a “must-have” for any industrial flooring contractor that applies floor coatings or needs to remove old coatings, carpet glue, or grind down high spots. This setup comes with the U.S.SAWS Generation 2 dust shroud, a Metabo 24-230 Grinder, Comfort Grip Loop Handle and (2) 7” 12 Segment Turbo Cup Wheels.
U.S.Saws #SX60006PPG2 Specifications
- Zoro #: G401941596
- Mfr #: SX60006PPG2
- Country of Origin (subject to change): Germany
Related Products
Angle Grinder, Wheel Diameter 5 in, Current 11 A, Max. Speed 11,000 RPM, Minimum Speed 7,500 RPM, Switch Type Paddle, Overall Length 11 3/8 in, Kit Contents (1) Bare Tool, (1) Guard, Accessory Free Tool Change Yes, Head Type Standard Head, Grip Style Barrel Grip, Guard Adjustment Toolless Adjustable, Spindle Thread Size M14, Duty Heavy Duty, Brake Type None, Dust Management Dust Guard, Vibration Level 1.5 m/sq sec, Lock-Off Switch Yes, Lock-On Switch No
Die Grinder, Anti-Kickback Clutch Type None, Anti-Restart Technology No, Brake Type None, Collet Size 1/4 in, Current 4.2 A, Grip Style Barrel Grip, Overall Length 14 in, Switch Type Paddle, Voltage 120V AC, Max. Speed 25,000 RPM, Minimum Speed 25,000 RPM, Number of Speed Settings 1, Grinder Orientation Straight, Collet Guard Type 1/4 in Guard, Tether Style Tether Ready, Kit Contents (1) Bare Tool, Safety Stop Mechanisms None, Lock-On Switch No, For Wheel Dia. 1.5 in
The 5" Metabo Concrete Polishing Package comes equipped with Metabo PE 15-30 variable speed grinder (13 Amp, 800 to 3,000 RPM), 5" convertible dust shroud, 5" loop handle, and 5" flexible backing pad. Intended for use with resin polishing pads.
The U.S.SAWS TC-7 Stand-Up Edge Grinder was designed for concrete floor grinding and polishing concrete surfaces near walls and other vertical surfaces. This grinder can be used indoors or outdoors in small or large spaces. This edge grinder utilizes 7” diamond cup wheel to level, smooth, or clean the edges of the concrete slab. The U.S.SAWS TC-7 features the U.S.SAWS Generation 2 concrete dust shroud system for a clean, dust-free work environment.
The U.S.SAWS is a low-cost way to turn your shop-vac into an effective industrial dust collector. It separates 99% of the concrete dust before it reaches the shop-vac. Compatible with 5" or 7" Hand-Held GrinderPackage includes: separator, 8' hose, and roller baseMeets OSHA Table 1: Section 11 & 12 (XI) Handheld grinders for mortar removal (i.e., tuckpointing). (XII) Handheld grinders for uses other than mortar removal.
The U.S.SAWS Core EZ Core® makes core drilling easy by utilizing standard 110 V power. The Core EZ® is lightweight, portable,and easy to use. The system is designed with an anchor bolt andguidepost to allow faster, cleaner cutting in closequarters and prevents damage to the surface being drilled.
U.S.SAWS DuraVac 220B is a lightweight and highly durable industrial dust collection system. The is equipped with a tested and certified HEPA filter that traps the most dangerous to breathe dust particles and prevents them from being released into the air. The Dura Vac not only exhausts perfectly clean air, but it is also far more efficient for the fast recovery of bulk dry dust, debris, and other building materials found on every construction, abatement, and restoration job site. The DuraVac 220B is OSHA certified dust collection system.
Angle Grinder, Wheel Diameter 4 1/2 in, Current 11 A, Max. Speed 11,000 RPM, Minimum Speed 11,000 RPM, Switch Type Paddle, For Wheel Type Type 27, Overall Length 13 1/8 in, Kit Contents (1) Bare Tool, (1) Type 27 Guard, (1) Grinding Wheel, Accessory Free Tool Change Yes, Head Type Standard Head, Grip Style Rat Tail, Guard Adjustment Toolless Adjustable, Spindle Thread Size 5/8 in-11, Duty Heavy Duty, Brake Type None, Electrical Protection Burst-Protection, Overload Protection, Lock-Off Switch No
U.S.SAWS Battery Powered BP1520 Utility Pump is a high-volume pump designed to remove standing water from meter pits, valve boxes, and other underground structures where standing water is a problem. The battery adapter can be configured for a 20 Volt Dewalt or 18V Milwaukee battery. The PVC body and housing will never rust, dent, bend or corrode. The slim design of the pump head will fit into tight areas where water removal is most challenging.
The U.S.SAWS Bagger-Vac Frame is designed to allow the Ultra-Vac 1250 Dust Collector Series to use Longopac bags. The vacuum mounts to a steel chassis, and the bag is enclosed on three sides, protecting it from accidental rips and tears.
U.S.SAWS Ultra Vac 1250 dust collection system is a lightweight, durable, and easy-to-use system. This vacuum can handle any surface preparation cleanup projects, small or large. This system is OSHA certified and under table 1 regulations.Equipped with a large HEPA filter, the Ultra Vac 1250 will withstand full loads of dust while never jeopardizing suction power. Along with that, this dust collection system can also work well with gas-powered equipment necessary for other surface preparation projects such as masonry and block saw equipment.
The U.S.SAWS Pro Grinder package is a handheld concrete surface grinder that is designed to prepare concrete surfaces for coatings and collect the dust at the same time while hooked up to a vacuum. This grinder is considered a “must have” for any industrial flooring contractor that applies floor coatings or needs to remove old coatings, carpet glue or grind down high spots. Package Includes: Metabo W24-230 15 Amp 6,600 RPM Metabo Grinder, Convertible Dust Shroud, 7" 24-Seg Turbo Cup Wheel, Adapter Nuts & Loop Handle
Reviews
There are no reviews yet.