U.S.Saws Battery Powered Pump
Original price was: $321.96.$94.99Current price is: $94.99.
U.S.SAWS Battery Powered BP1520 Utility Pump is a high-volume pump designed to remove standing water from meter pits, valve boxes, and other underground structures where standing water is a problem. The battery adapter can be configured for a 20 Volt Dewalt or 18V Milwaukee battery. The PVC body and housing will never rust, dent, bend or corrode. The slim design of the pump head will fit into tight areas where water removal is most challenging.
U.S.Saws #US27844 Specifications
- Zoro #: G801979182
- Mfr #: US27844
- Country of Origin (subject to change): United States
Related Products
The U.S.SAWS 7” Grinder-vac is a hand-held concrete surface grinder that is designed to prepare concrete surfaces for coatings and collect the dust at the same time while hooked up to a vacuum. This grinder is considered a “must-have” for any industrial flooring contractor that applies floor coatings or needs to remove old coatings, carpet glue, or grind down high spots. This setup comes with the U.S.SAWS Generation 2 dust shroud, a Metabo 24-230 Grinder, Comfort Grip Loop Handle and (2) 7” 12 Segment Turbo Cup Wheels.
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 in, Spindle Taper 2MT, Motor HP 1 hp, Capacity Steel 5/8 in, Capacity Cast Iron 3/4 in, Drilling Capacity Wood Not Specified, Includes Motor, Drill Chuck and Key, Power Down Feed Included No, Voltage 120, Amps AC 10.0, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 240 to 3200 rpm, Spindle Travel 3 5/32 in, Base Size 18 in x 11 in, Table Work Surface 12 in x 12 in, Hz 60, Phase 1, Number of T-Slots 2
Fits on a variety of handheld floor grinders and provides increased operator comfort.The assembly includes: with rubber grip, bolts, and lock washers.
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.
The most powerful single-speed hammer drill on the market, with up to 2X more durability. This practical 8 amp, 1/2 in. dual-mode hammer drill offers power and versatility for a variety of tough jobs, with an impressive 0-2,800 RPMs and 0-48.000 Bpms. Superior engineering, an all-metal gear case and a heavy-duty metal chuck make this twice as durable as the leading competitor while maintaining outstanding performance. The compact 11.5 in. profile lets you work in tight spaces, and the two modes accommodate drilling in wood, steel and plastic or hammer drilling in concrete. A removable 360° side handle helps you set the depth rod for pre-set hole drilling. Over-molding ensures a surer, more comfortable grip and minimizes vibration and fatigue on the jobsite.
The U.S.SAWS is a low-cost way to turn your shop-vac into an effective industrial dust collector. It separates 99% of the concrete dust before it reaches the shop-vac. This package comes with 10 disposable bags.Compatible with 5" or 7" Hand-Held GrinderPackage includes: separator, 8' hose, roller base and 10 disposable bagsMeets OSHA Table 1: Section 11 & 12 (XI) Handheld grinders for mortar removal (i.e., tuckpointing). (XII) Handheld grinders for uses other than mortar removal.
The 5 gallon pump has a flow rate of up to 1 gallon per minute and battery life of up to 8 hours. The oversized wheels and lifting handle allow you to get around the job site easily. Includes: 5 Gallon Battery Operated Water Feed Tank, Charger, Collapsible Handle & (2) 6" Wheels
Fits on a variety of hand-held grinders and provides increased operator comfort.The assembly includes with rubber grip, bolts, and lock washers.
The U.S.SAWS is a low-cost way to turn your shop-vac into an effective industrial dust collector. It separates 99% of the concrete dust before it reaches the shop-vac. Compatible with 5" or 7" Hand-Held GrinderPackage includes: separator, 8' hose, and roller baseMeets OSHA Table 1: Section 11 & 12 (XI) Handheld grinders for mortar removal (i.e., tuckpointing). (XII) Handheld grinders for uses other than mortar removal.
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 800 lb, Power Down Feed Included Yes, Coolant System Yes, Tool Style Large
The U.S.SAWS Bagger-Vac Frame is designed to allow the Ultra-Vac 1250 Dust Collector Series to use Longopac bags. The vacuum mounts to a steel chassis, and the bag is enclosed on three sides, protecting it from accidental rips and tears.
Reviews
There are no reviews yet.