U.S.Saws Battery Powered Pump
Original price was: $381.43.$96.99Current price is: $96.99.
The 5 gallon pump has a flow rate of up to 1 gallon per minute and battery life of up to 8 hours. The oversized wheels and lifting handle allow you to get around the job site easily. Includes: 5 Gallon Battery Operated Water Feed Tank, Charger, Collapsible Handle & (2) 6" Wheels
U.S.Saws #US27815 Specifications
- Zoro #: G001979166
- Mfr #: US27815
- Country of Origin (subject to change): United States
Related Products
Drill Kit, Handle Style D-Handle, Chuck Size 1/2 in, No Load RPM 0 to 600/0 to 900, 7.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 16 1/4 in, Tool Weight 10.3 lb, Gear Train Quadruple, Switch Type Trigger, Reversible Yes, Cord Length 8 ft, Features Carrying Case, Head and Handle Swivel 360 Degrees , Side Handle, Includes (1) Carrying Case, (1) RAD Assembly, (1) Side Handle
U.S.SAWS Battery Powered BP1520 Utility Pump is a high-volume pump designed to remove standing water from meter pits, valve boxes, and other underground structures where standing water is a problem. The battery adapter can be configured for a 20 Volt Dewalt or 18V Milwaukee battery. The PVC body and housing will never rust, dent, bend or corrode. The slim design of the pump head will fit into tight areas where water removal is most challenging.
Magnetic Drill Press, Magnet Type Electro, Variable Speed Yes, Drilling Capacity in Steel 1 5/8 in, Drilling Capacity in Wood 1 5/8 in, Drilling Capacity in Cast Iron 1 5/8 in, Drill Travel 5 3/4 in, Maximum Spindle Speed 730 RPM, Minimum Spindle Speed 475 RPM, Current 13 A, Voltage 120V AC, Phase Single-Phase, Base Type Fixed, Spindle Taper 3/4 in, Chuck Size 3/4 in, Chuck Style Weldon Quick Change, Drill Point Pressure 800 lb, Power Down Feed Included Yes, Coolant System Yes, Tool Style Large
U.S.SAWS DuraVac 221B is a lightweight and highly durable industrial dust collection system. This is equipped with tested and certified HEPA filters that trap the most dangerous to breathe dust particles and prevents them from being released into the air. The Dura Vac exhausts perfectly clean air. It is far more efficient for the fast recovery of bulk dry dust, debris, and other building materials found on every construction, abatement, and restoration job site. The DuraVac 221B is OSHA certified dust collection system.
Fits on a variety of handheld floor grinders and provides increased operator comfort.The assembly includes: with rubber grip, bolts, and lock washers.
Drill, Handle Style Spade, Chuck Size 1/2 in, No Load RPM 0 to 550, 9.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 15 1/2 in, Tool Weight 7.5 lb, Gear Train Triple, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 2-Conductor, Includes 2-Position Rear and 3-Position Side Handles and Holder
This heavy duty magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0 to 850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites.
The U.S.SAWS Bagger-Vac Frame is designed to allow the Ultra-Vac 1250 Dust Collector Series to use Longopac bags. The vacuum mounts to a steel chassis, and the bag is enclosed on three sides, protecting it from accidental rips and tears.
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1200, 10.5 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 11 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features Metal Housing, Soft Grip Handle, Includes Holder. The DWD220 1/2" VSR Pistol Grip Drill with E-Clutch Anti-Lock Control has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.
U.S.SAWS Battery Powered BP1520 Utility Pump is a high-volume pump designed to remove standing water from meter pits, valve boxes, and other underground structures where standing water is a problem. The battery adapter can be configured for a 20 Volt Dewalt or 18V Milwaukee battery. The PVC body and housing will never rust, dent, bend or corrode. The slim design of the pump head will fit into tight areas where water removal is most challenging.Pumps 15 Gallons Per Minute
The most powerful single-speed hammer drill on the market, with up to 2X more durability. This practical 8 amp, 1/2 in. dual-mode hammer drill offers power and versatility for a variety of tough jobs, with an impressive 0-2,800 RPMs and 0-48.000 Bpms. Superior engineering, an all-metal gear case and a heavy-duty metal chuck make this twice as durable as the leading competitor while maintaining outstanding performance. The compact 11.5 in. profile lets you work in tight spaces, and the two modes accommodate drilling in wood, steel and plastic or hammer drilling in concrete. A removable 360° side handle helps you set the depth rod for pre-set hole drilling. Over-molding ensures a surer, more comfortable grip and minimizes vibration and fatigue on the jobsite.
Drill, Handle Style Pistol Grip, Chuck Size 1/2 in, No Load RPM 0 to 1250, 10.0 A Amps, Voltage 120V AC, Drill Chuck Type Keyed, Tool Length 12 in, Tool Weight 4.9 lb, Gear Train Double, Switch Type Trigger, Speed Type Variable, Reversible Yes, Cord Length 8 ft, Features 3-Conductor, Includes 360 Degrees Side Handle with Soft Grip. The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.
Reviews
There are no reviews yet.